勘探与生产亮点：2023 年 3 月 27 日

以下是最新勘探与生产头条新闻的摘要，包括上游石油和天然气行业的新合同授予。

经过
詹妮弗
帕拉尼奇
哈特能源

从地震活动到油田开发计划，以下是勘探与生产领域最新头条新闻的汇编。

活动头条

Aker BP 放弃 Troldhaugen 计划

Aker BP 于 3 月 21 日宣布，除一项该公司于 2022 年 12 月向挪威石油和能源部提交的开发和运营计划外，该公司将继续推进所有计划。

2022年底，Aker BP及其合作伙伴提交了Yggdrasil、Valhall PWP-Fenris、Skarv Satellites、Utsira High和Troldhaugen的开发和运营计划（PDO）。Troldhaugen 项目将不会继续推进。

Aker BP 表示，将推进的项目的可采储量预计为 Aker BP 净值 730 MMboe，需要 190 亿美元的投资，平均盈亏平衡价格为 35 美元/桶至 40 美元/桶。

合同和公司新闻

CGG完成苏里南海上第四期工程 

CGG于3月21日宣布，已完成苏里南近海深水3D地震勘测第四阶段，快速通道产品将于今年年中准备好接受审查，整个项目的最终产品将于2023年底推出。

第四阶段覆盖 1,800 平方公里，完成了对圭亚那-苏里南盆地深水和浅水区新获取的 3D 数据的 14,500 平方公里的计划调查。该计划还包括超过 6,400 平方公里的再处理数据。新的多客户数据将支持苏里南的深水和浅水招标。

Equinor 将 Berlining 工作授予 Aker Solutions

Aker Solutions 于 3 月 27 日宣布，Equinor 授予其一份规模相当大的合同，将两个气田连接到脜sgard B 平台。这两个领域之前被称为“Iris”和“Hades”，现已更名为“Berling”。

Berling 与脜sgard B 的配套是一个设计、采购、施工、安装和调试项目。海上动员将于 2025 年 11 月开始，回接将于 2027 年 12 月完成。计划于 2028 年开始生产。

HiCrush 将为 Pioneer 部署 OnCore 单元

Hi-Crush Inc. 于 3 月 21 日宣布，已与 Pioneer Natural Resources 达成协议，部署 Hi-Crush 的第六台 OnCore 移动采矿装置，为 Pioneer 在米德兰盆地的完井活动提供压裂砂。这将是 Hi-Crush 继 2022 年 9 月 OnCore #4 成功开始运营后与 Pioneer 进行的第二次 OnCore 部署，也是 Hi-Crush 在米德兰盆地内的第五次 OnCore 部署。

PGS 赢得新的 3D 合同

PGS于3月22日宣布，一家大型国际能源公司已授予其一份3D勘探收购合同。Ramform Titan 将于 6 月下旬启动调查，预计将于 2023 年 8 月完成收购。

LLOG 为萨拉曼卡管汇聘请潮流引领者

Trendsetter Engineering Inc. 于 3 月 27 日宣布，LLOG Exploration Offshore 已授予其一份合同，为墨西哥湾深水莱昂和卡斯蒂利亚的萨拉曼卡海底开发项目提供海底硬件。

Trendsetter 的工作范围包括设计和制造海底生产管汇，该管汇采用 Trendsetter 的 TCS 海底连接器以及来自意大利 Advanced Technology Valve SpA (ATV) 的阀门。Trendsetter 还为出口搭接件提供 TCS 连接器和 ATV 阀门。该设备预计于 2024 年初交付。

MDL DOF 加蓬之夜
Skandi Constructor 上的 MDL 设备。（来源：MDL）

Maritime Developments Ltd. (MDL) 于 3 月 22 日报告称，它支持 DOF Subsea 在加蓬近海进行油田再开发。

Skandi Constructor 上采用了完整的 MDL 柔性铺设系统，包括带有 TTS-4/140 系列张紧器的水平铺设系统 (HLS) 和第三代卷轴驱动系统。

范围涵盖脐带缆和软管的回收和安装，作为用 FSO 替换 FPSO 的一部分。该项目是该油田基础设施升级的一部分，旨在降低运营成本，同时增加存储容量，并有助于延长油田的生产寿命。

在 MDL HLS 的支持下，灵活的产品通过船舶的月池进行处理。该紧凑型系统允许安全、方便地悬挂产品的终端，从而实现高效的中线连接。

Hess 选择 DecisionSpace 365

哈里伯顿公司 (Halliburton Co.) 于 3 月 22 日宣布，赫斯公司 (Hess Corp.) 已选择 Halliburton Landmark 的 DecisionSpace 365 Well Construction 应用程序来规划、设计和建造油井。

Halliburton 表示，借助由 iEnergy 混合云提供支持的 DecisionSpace 365，Hess 可以利用人工智能和机器学习的预测性钻井分析来获得整个油井施工生命周期的全面监督。

原文链接/hartenergy

E&P Highlights: March 27, 2023

Here’s a roundup of the latest E&P headlines including new contract awards in the upstream oil and gas industry.

By
Jennifer
Pallanich
Hart Energy

From seismic activity to field development plans, below is a compilation of the latest headlines in the E&P space.

Activity headlines

Aker BP drops Troldhaugen plans

Aker BP announced on March 21 it would move forward on all but one of the plans for development and operation the company submitted to the Norwegian Ministry of Petroleum and Energy in December 2022.

At the end of 2022, Aker BP and its partners submitted plans for development and operation (PDO) for Yggdrasil, Valhall PWP-Fenris, Skarv Satellites, Utsira High and Troldhaugen. The Troldhaugen project will not move forward.

Aker BP said the recoverable reserves from the projects that will move forward are estimated at 730 MMboe net to Aker BP and will require $19 billion of investments, set at an average breakeven price of $35/bbl to $40/bbl.

Contracts and company news

CGG completes Phase IV of offshore Suriname 

CGG announced on March 21 that it had completed Phase IV of the deepwater 3D seismic survey offshore Suriname and that fast-track products will be ready for review toward the middle of this year, with final products for the entire program available in late 2023.

Phase IV covers 1,800 sq km and completes the programmed 14,500 sq km survey of newly acquired 3D data in deep and shallow water in the Guyana-Suriname Basin. The program also includes over 6,400 sq km of reprocessed data. The new multi-client data will support Suriname’s deepwater and shallow-water bid rounds.

Equinor awards Berling work to Aker Solutions

Aker Solutions announced on March 27 that Equinor had awarded it a sizeable contract to tie back two gas fields to the Åsgard B platform. The two fields were previously known as Iris and Hades and have been renamed Berling.

The Berling tie-in to Åsgard B is an engineering, procurement, construction, installation and commissioning project. Offshore mobilization will begin in November 2025, and the tie-back will be completed in December 2027. Production start is planned for 2028.

HiCrush to deploy OnCore unit for Pioneer

Hi-Crush Inc. announced on March 21 that it had entered into an agreement with Pioneer Natural Resources to deploy Hi-Crush’s sixth OnCore mobile mining unit to supply frac sand for use in Pioneer’s well completions activity in the Midland Basin. This will be Hi-Crush’s second OnCore deployment with Pioneer following the successful start of operations at OnCore #4 in September 2022, and Hi-Crush’s fifth OnCore deployment within the Midland Basin.

PGS wins new 3D contract

PGS announced on March 22 that a major international energy company had awarded it a 3D exploration acquisition contract. The Ramform Titan will mobilize for the survey in late June, with acquisition expected to be complete in August 2023.

LLOG taps Trendsetter for Salamanca manifold

Trendsetter Engineering Inc. announced on March 27 that LLOG Exploration Offshore had awarded it a contract to provide subsea hardware for the Salamanca subsea developments at Leon and Castile in the deepwater Gulf of Mexico.

Trendsetter’s scope of work includes the design and manufacture of the subsea production manifold featuring Trendsetter’s TCS subsea connectors along with valves sourced from Advanced Technology Valve SpA (ATV) in Italy. Trendsetter is also supplying TCS connectors and ATV valves for the export tie-ins. The equipment is slated for delivery in early 2024.

MDL DOF Gabon Night
MDL equipment on the Skandi Constructor. (Source: MDL)

Maritime Developments Ltd. (MDL) reported on March 22 it supported DOF Subsea on a field redevelopment scope offshore Gabon.

A complete MDL flex-lay spread, consisting of a horizontal lay system (HLS) with the TTS-4/140 Series Tensioner, and a Generation 3 Reel Drive System, was mobilized on the Skandi Constructor.

The scope covered recovery and installation of umbilicals and flexibles as part of an FPSO replacement with an FSO. The project was part of the field’s infrastructure upgrade, aiming to reduce operational costs while increasing storage capacity and contributing to the extension of the field’s producing life.

The flexible products were handled through the vessel’s moonpool, enabled by the MDL HLS. The compact system allowed for efficient mid-line connections by allowing safe and convenient hang-off for the products’ end terminations.

Hess picks DecisionSpace 365

Halliburton Co. announced on March 22 that Hess Corp. had selected Halliburton Landmark’s DecisionSpace 365 Well Construction applications to plan, design and construct wells.

With DecisionSpace 365 powered by iEnergy hybrid cloud, Hess can leverage predictive drilling analytics using artificial intelligence and machine learning to gain comprehensive oversight across the entire well construction lifecycle, Halliburton said.