试水:新技术旨在清洁油田产生的水

从纳米颗粒到气泡,德克萨斯大学二叠纪盆地的德克萨斯水与能源研究所正在分析数据,以期为石油生产过程中产生的水寻找潜在的归宿。

油和水可能不会混合,但在油田中,它们确实会混合。当生产一桶石油时,一定量的水(也许是 5 桶)也会从地下汩汩流出。新研究和技术的目标是为产出水找到合适的目的地。

德克萨斯大学二叠纪盆地的德克萨斯水与能源研究所 (TWEI) 正在研究处理采出水的方法,并将其重新用于建筑工地、灌溉农作物、支持发电、潜在地回灌含水层或添加到地表水。

TWEI 有两个研究项目正在进行中,并且已经开发了一个数据库,公司可以参考该数据库来确定他们的技术是否能够处理某些地点的采出水。

TWEI 主任兼工程学院院长 George Nnanna 表示,该研究所的目标是找到使用可再生能源来处理采出水的方法,并通过数据分析提高水智能。

石油和天然气工业会产生大量的水,但如果操作人员不将水重新注入原始水库,则必须首先对其进行处理,然后才能重新使用。不同用途的水有不同的处理要求。

在二叠纪盆地,总溶解固体可达 200,000 毫克/升,这使得处理具有挑战性。

“最终,如果处理得当,我认为给含水层补水可能就不远了,”纳纳说。“在加利福尼亚地区,产出水的溶解盐含量较低,他们将其排放到地表水中。”

纳米粒子漂浮系统

TWEI 正在进行的工作之一是浮动膜系统。多孔膜设计具有纳米尺寸的颗粒,它漂浮在产出水箱的表面。

当水渗透过膜时,它就会蒸发。然后收集干净的水蒸气并冷凝成纯净水。

Nnanna 说,这种膜可以增强蒸发,“我们已经在完善这一点。”

Nnanna 将这一过程称为“使用太阳能伞增强蒸发”,该过程在实验室中“完美运行”,并在中试规模上进行了良好的测试。它引起了业界的兴趣,TWEI 在过去六个月里一直致力于在生命规模上进行额外的试点。

在那次试点期间,TWEI 收集并分析了数据,这些数据将有助于确定影响膜性能的参数。

Nnanna 说,持续几周的实验室测试使蒸发率提高了 17% 至 20%。

“我们正在进行实验,”他说。“我们仍在获取温度、湿度和其他数据。”

他说,膜的材料很便宜,因此从经济角度来看,处理成本不应过高。该膜已连续使用六周,没有出现性能下降问题。

试水:新技术有望解决采出水问题
TWEI 实验室研究人员正在测试采出水样本。(来源:TWEI)

略读表面

TWEI 还在研究将微小气泡注入产出水箱底部的预处理系统的可行性。当气泡在水中上升时,它们可以将颗粒物拉到水面进行撇油。

Nnanna 说,经过初步预处理后,可以在水中添加化学物质以帮助颗粒凝结,然后将产出水通过一系列过滤器,以“产生更清洁的水”。

TWEI 拥有 1,900 平方英尺的设施来容纳溶气气浮系统。研究的下一步是让行业测试产出水的有效性。

水情报

TWEI 使用从美国地质调查局收集的 45 个不同行业的超过 2300 万个数据点建立了采出水数据库。

Nnanna 表示,正在分析这些数据,以期对未来采出水的行为进行预测。该数据库可从 TWEI 获取,并可通过订阅访问。TWEI 内的一个小组负责维护该数据库。

“通过我们的数据库,你可以查看某个地点的水化学成分,并判断你的技术是否能够处理该地点产生的水,”他说。“您可以查看这个数据库,而不是去现场测试它,它会给您总溶解固体范围的指示。”

该数据库还使得建立总溶解盐与钠和氯之间的经验相关性成为可能。

 “如果您知道钠和氯化物的浓度,则可以使用该方程来确定总溶解固体,而不是对采出水进行实验室表征来获取总溶解固体的信息,”Nnanna 说。

原文链接/hartenergy

Testing the Waters: New Tech Aims to Clean Oilfield's Produced H2O

From nanoparticles to air bubbles, the University of Texas Permian Basin’s Texas Water and Energy Institute is analyzing data to potentially find a home for water produced during oil production.

Oil and water may not mix, but in the oilfield, they do mingle. When a barrel of oil is produced, a certain amount of water, 5 bbl perhaps, comes gurgling out of the ground,  too. The goal of new research and technologies is to find a suitable destination for that produced water.

The University of Texas Permian Basin’s Texas Water and Energy Institute (TWEI) is studying methods to treat produced water an repurpose it for construction sites, to irrigate crops, support power generation, potentially recharge aquifers or add to surface water.

The TWEI has two research projects underway and has already developed a database that companies can consult to determine whether their technology is capable of treating produced water from certain locations.

TWEI director and dean of the College of Engineering George Nnanna said the institute aims to find ways to use renewable energy-based sources to treat produced water and to increase water intelligence through data analytics.

The oil and gas industry produces lots of water, but it must first be treated before it can be reused if operators don’t reinject it into the original reservoir. Different uses of the water have different treatment requirements.

In the Permian Basin, total dissolved solids can reach 200,000 mg/liter, which makes treatment challenging.

“Eventually, if it’s well-treated, I think it might not be far off to recharge the aquifer,” Nnanna said. “In the California area, where the produced water has low dissolved salt, they are discharging it into the surface water.”

Nanoparticle floating system

One of the efforts underway at TWEI is a floating membrane system. The porous membrane design features nano-sized particles, and it floats on the surface of the produced water tank.

When the water permeates through the membrane, it evaporates. The clean water vapor is then collected and condensed into purified water.

Nnanna said the membrane enhances evaporation, which “we have been perfecting.”

The process, which Nnanna calls Enhanced Evaporation using Solar Umbrella, has “worked perfectly” in the lab and has tested well at the pilot scale. It has drawn industry interest, and TWEI has been working toward an additional pilot at life scale for the past six months.

During that pilot, TWEI gathered and analyzed data that will help determine the parameters that affect the membrane’s performance.

The lab test, which lasted a few weeks, generated a 17% to 20% enhancement in the evaporation rate, Nnanna said.

“We have ongoing experiments,” he said. “We are still getting temperature, humidity and other data.”

The material for the membrane is inexpensive, so the economics should not make treatment cost-prohibitive, he said. The membrane has been continuously used for six weeks without performance degradation issues.

Testing the Waters: New Tech Looks to Solve the Produced Water Problem
A TWEI lab researcher is testing a produced water sample. (Source: TWEI)

Skimming the surface

TWEI is also researching the viability of a pre-treatment system that injects tiny air bubbles into the bottom of produced water tanks. As the bubbles rise through the water, they can pull particulates to the surface of the water for skimming.

Following the initial pre-treatment, chemicals could be added to the water to help particulates coagulate before running the produced water through a series of filters to “produce a much cleaner water,” Nnanna said.

TWEI has a 1,900-sq-ft facility to house the dissolved air floatation system. The next step for the research is to have the industry test produced water for effectiveness.

Water intelligence

TWEI has built a produced water database using more than 23 million data points collected from the U.S. Geological Survey across 45 different industries.

Nnanna said the data is being analyzed for the potential to make projections about the behavior of produced water in the future. The database is available from TWEI and is accessible via subscription. A group within TWEI maintains the database.

“With our database, you can look at the water chemistry in a certain location and make a judgment if your technology is capable of treating the produced water from that place,” he said. “Instead of going to the field to test it, you can look at this database, and it will give you an indication of the range of total dissolved solids.”

The database has also made it possible to establish an empirical correlation between total dissolved salts and sodium and chloride.

 “Instead of doing a laboratory characterization of produced water to get information on the total dissolved solids, if you know the concentration of sodium and chloride, you can use this equation to establish what the total dissolved solids will be,” Nnanna said.