Shearwater 将 BASS 投影仪模块的尺寸缩小至约 2 m x 2 m x 3 m，重量降至约 5,000 kg。这使得可以在标准地震船的后甲板上处理多个投影仪，并根据测量要求以灵活的源几何形状将它们拖到船后面。一艘小型震源船将能够并行牵引多达八个 BASS 投影仪模块，再现标准气枪源的输出，并且船上仍然有空间容纳多个替换模块。
New Marine Vibrator Offers A More Efficient and Eco-Friendly Seismic Source
Marine vibrators provide less environmental impact and better data.
Sara Amar, Shearwater; and Peter Hanssen, Equinor
Learn more about Hart Energy Conferences
Get our latest conference schedules, updates and insights straight to your inbox.
[Editor's note: A version of this story appears in the September 2020 edition of E&P Plus. Subscribe to the magazine here.]
Active seismic acquisition is one of the first key steps in the exploration for new oil and gas reserves and is also fundamental in the effort to optimize the development and production of existing oil fields. It uses seismic waves emitted by sources at discrete locations, and some of that energy is reflected back from layers in the subsurface to tens of thousands of recording sensors. The data are then processed to give an image of the subsurface, which is later analyzed by geologists to identify commercial deposits of hydrocarbons.
A typical marine seismic acquisition is conducted using airgun source arrays towed behind a vessel. Such a source typically comprises about 30 single airguns of different volumes, all firing at the same time to produce a sharp acoustic peak. The principle technology of airguns has not evolved much since the 1970s when it replaced the use of dynamite, and airguns stayed inherently inflexible by nature.
It is very challenging to shape the energy spectrum of an airgun source to suit a particular geological application, which means that in most cases the source ends up emitting more energy than what is required for seismic imaging as well as energy at higher frequencies than those used to form the final seismic image. The marine vibrator system has the capability to emit the same energy as an airgun source, but it distributed over time and over a precisely chosen frequency range. Therefore, it is considered less damaging and disturbing to marine fauna.
Environmental awareness
Increased environmental awareness and the resulting restrictions have motivated new efforts toward the development of marine vibrators as an alternative to airguns. Swept-frequency marine vibrators are one way to reduce levels of sound impact to the environment and to satisfy any restrictions. In the past, marine vibrators have been found to be deficient in energy output, especially at low frequencies. The achievable energy spectrum was found to roughly match the airgun energy spectrum at higher frequencies, but it failed to match it at low frequencies.
An alternative approach is to design the sweep to generate just enough energy at each frequency to create the required signal-to-noise ratio for imaging the target area in depth. Therefore, it is a necessity for any marine vibrator operation to not only avoid unused energy transmissions but to be able to move this excess energy to useful lower frequencies. Unlike airguns, vibrators allow the exact definition of which frequencies should be emitted for a specific geological setting and the survey target.
A main challenge that presents itself is achieving the required low frequency output with a practical and reliable marine vibrator. Sweeping at low frequencies requires a large volume of water displacement as the pressure output depends on the second derivative of the volume displacement. This leads to a roll-off in output as the driving frequency is reduced. An in-depth trade-off analysis shows that using a hydraulic-based drive technology enables the marine vibrator to reach low frequencies down to 3 Hz. Hydraulics can produce extremely high forces and enable fast actuation, while precisely controlling the phase and amplitude. Furthermore, hydraulics are reliable commercial components and are used widely in various industries such as aviation and robotics.
BASS system
To develop a commercially viable marine vibrator source, Shearwater has considered the Broadband Acoustic Seismic Source (BASS) system as a whole and designed it in a way that provides optimal functionality and interaction of all supporting subsystems that will handle, operate and maintain the projector modules. The projector modules are the units towed in the water, designed to be able to emit a specific waveform.
Shearwater has reduced the dimensions of a BASS projector module to about 2 m-by-2 m-by-3 m and its weight to about 5,000 kg. This makes it possible to handle multiple projectors on the back deck of a standard seismic vessel and tow them behind the vessel in a flexible source geometry based on the survey requirements. A small seismic source vessel will be able to tow up to eight BASS projector modules in parallel, reproducing the output of a standard airgun source and still have space for multiple replacement modules on board.
The rendering depicts an example of a configuration with four projector modules towed behind the seismic vessel hanging from floats. The units are deployed at different depths and do not have the same alignment behind the vessel. (Source: Shearwater)
So far, only the ability to avoid emitting superfluous higher frequencies has been discussed here, but because the vibrator also sweeps the seismic energy over time, the sound pressure level (SPL) is significantly reduced, reducing the acoustic footprint from thousands of pops to something comparable to a constant whoosh next to a street. Additionally, one can also moderate the sound exposure level (SEL) at will, which is a measure of how much energy is sent out over a certain time duration. Frequency content, SPL and SEL are measures of environmental impact, and these can be customized precisely with the BASS.
Next to the environmental advantages of a marine vibrator, the precise control of the phase of the seismic signal provides the means to obtain a significant efficiency advantage compared to an airgun system.
By utilizing advanced processing techniques, combined with a smartly designed source geometry tailored to the survey area, the source productivity is expected to greatly increase. The main enabler of the productivity increase is the directivity of the BASS, making it possible to unlock gradient-source processing capabilities as shown in the case of ocean-bottom nodes (OBN).
Full-azimuth OBN surveys are considered to be the gold standard in terms of image quality and the ability to accurately characterize reservoir properties. Despite their superior quality, less than 40% of all seismic acquisitions are on the ocean bottom, mainly due to cost. One reason for the high cost of seabed acquisition results from the long acquisition times in the field, and consequently the vessel costs. Modeling shows that the BASS marine vibrator system can potentially reduce the acquisition time and the overall survey cost.
The BASS marine vibrator system will enable global E&P companies to operate with lower impact to the environment, which may be particularly important in areas with busy or narrow acquisition windows due to other marine activities, such as commercial fishing. Marine vibrators are a potential game changer because they address three important objectives: more efficiency, less environmental impact and better data.
